|
100 % SAFE |
VAPOL VG SÉRIE 3000
Evanescent fluids new generation |
TYPICAL PHYSICAL AND CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS
|
VALUES VG 3005 |
VALUES VG 3010 |
VALUES VG 3015 |
VALUES VG 3020 |
UNITS |
|
|
Appearance |
Visual |
Liquid |
Liquid |
Liquid |
Liquid |
- |
|
|
Colour |
Visual |
Yellow |
Orange-yellow |
Orange-yellow |
Orange-yellow |
- |
|
|
Odour |
Olfactory |
Odourless |
Odourless |
Odourless |
Odourless |
- |
|
|
Density at 25°C |
NF EN ISO 12185 |
0.945 |
0.940 |
0.936 |
0.932 |
kg/m3 |
|
|
Refractive index |
ISO 5661 |
1.4235 |
1.4250 |
1.4265 |
1.4280 |
- |
|
|
Freezing point |
ISO 3016 |
-50 |
-50 |
-50 |
-50 |
°C |
|
|
Kinematic viscosity at 40°C |
NF EN 3104 |
2,42 |
2,47 |
2,52 |
2,57 |
mm²/s |
|
|
Acid value |
EN 14104 |
0 |
0 |
0 |
0 |
mg(KOH)/g |
|
|
Iodine value |
NF EN 14111 |
0 |
0 |
0 |
0 |
gI2/100g |
|
|
Vapour pressure at 20°C |
NF EN 13016-1 |
0.3 |
0.3 |
0.3 |
0.3 |
hPa |
|
|
PERFORMANCE CHARACTERISTICS |
|
||||||
|
PROPERTIES |
STANDARDS |
VALUES VG 3005 |
VALUES VG 3010 |
VALUES VG 3015 |
VALUES VG 3020 |
UNITS |
|
|
Evaporation rate |
n-BuAc = 100 VG 1 |
0.030 350 |
0.030 350 |
0.030 350 |
0.030 350 |
Index |
|
|
Surface tension at 20°C |
ISO 6295 |
29.4 |
29.4 |
29.8 |
30 |
Dynes/cm |
|
|
Copper blade corrosion 100h at 40°C |
ISO 2160 |
1a |
1a |
1a |
1a |
Rating |
|
|
FIRE SAFETY PROPERTIES |
|
||||||
|
PROPERTIES |
STANDARDS |
VALUES VG 3005 |
VALUES VG 3010 |
VALUES VG 015 |
VALUES VG 3020 |
UNITS |
|
|
Flash point (vacuum) |
ISO 2719 |
85 |
85 |
85 |
85 |
°C |
|
|
Self-ignition point |
ASTM E 659 |
> 220 |
> 220 |
> 220 |
> 220 |
°C |
|
|
Lower explosive limit |
NF EN 1839 |
1 |
1 |
1 |
1 |
% (by volume) |
|
|
Upper explosive limit |
NF EN 1839 |
14 |
14 |
14 |
14 |
% (by volume) |
|
|
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation |
0 |
0 |
0 |
0 |
% |
|
|
TOXICOLOGICAL PROPERTIES |
|
||||||
|
PROPERTIES |
STANDARDS |
VALUES VG 3005 |
VALUES VG 3010
|
VALUES VG 3015 |
VALUES VG 3020 |
UNITS |
|
|
CMR, irritating and corrosive substance content |
CLP Regulation |
0 |
0 |
0 |
0 |
% |
|
|
Residual methanol content from transesterification |
GC-MS |
0 |
0 |
0 |
0 |
% |
|
|
Emissions of hazardous, CMR, irritant, corrosive compounds |
GC-MS |
0 |
0 |
0 |
0 |
% |
|
|
ENVIRONMENTAL PROPERTIES |
|
||||||
|
PROPERTIES |
STANDARDS |
VALUES VG 3005 |
VALUES VG 3010
|
VALUES VG 3015 |
VALUES VG 3020 |
UNITS |
|
|
Biodegradable. |
OECD 301 A OECD 301 C (MITI) |
> 70 > 70 |
> 70 > 70 |
> 70 > 70 |
> 70 > 70 |
% % |
|
|
Vapour pressure at 20°C |
- |
0.3 |
0.3 |
0.3 |
0.3 |
hPa |
|
|
VOC (Volatile Organic Compounds) content |
- |
< 55 |
< 50 |
< 45 |
< 40 |
% |
|
|
Sulphur content |
GC-MS |
0 |
0 |
0 |
0 |
% |
|
|
Benzene content |
ASTM D6229 |
0 |
0 |
0 |
0 |
ppm |
|
|
Total halogen content |
GC-MS |
0 |
0 |
0 |
0 |
% |
|
|
Chlorinated solvent content |
- |
0 |
0 |
0 |
0 |
% |
|
|
Chlorinated solvent content |
- |
0 |
0 |
0 |
0 |
% |
|
|
Environmentally hazardous substances content |
CLP Regulation |
0 |
|
|
|
% |
|
|
Content of compounds with a GWP |
- |
0 |
|
|
|
% |
|
|
Content of compounds with an ODP |
- |
0 |
|
|
|
% |
|
|
Carbon balance, life cycle analysis. |
ISO 14040 |
< 50 % |
< 50 % |
< 50 % |
< 50 % |
Carbon Equivalent Kg |
|
STORAGE
WITHOUT RETENTION
labour code for unlabelled products
ICPE code for non-polluting products
OUTDOOR STORAGE ALLOWED
PRESENTATION
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 